This install guide is for the Flat 6 Motorsport diverter valves, but can also be a guide for the front bumper removal on a 95b Porsche Macan.

Porsche Macan Diverter Valve I always like to start from the top and make my way down. It is useful to have a lift for this project, but it is not necessary.

 Tools needed are:

  • Small Flat Head Screwdriver
  • A T25 Torx
  • A T27 Torx
  • Socket Wrench for Torx sockets
  • Pliers for spring clamps 

 The First Step is to open the hood and review what you need for removal. Start by removing the four clips that are at each corner of the plastic shield (red arrows in the picture.) To remove these clips, insert a flat-head screwdriver into the side [...]

    Back to top